Description

Buy Innosilicon A10 PRO ETH. This Miner is from the Innosilicon mining EtHash algorithm and has a maximum hash rate of 500MH/s. The power consumption is 750W, which is considered power efficient and friendly.

It’s one of the few miners whose power consumption is below 1000W. With power being the main concern for miners, the A10 Pro ETH Miner is a better alternative.

Most miners also refer to it as the ETH King A10 Pro, which was May 2020. Some of the mineable coins include Etherium classic, Etherium, Musicoin, and Ubiq.

Some of the mining pools to find this platform include AntPool, Ethermine, NanoPool, Pooling, and ViaBTC. The material that is used to create this miner is metal. The chip Count is 342, and the noise level is set at 75db. The Innosilicon A10 Pro ETH Miner is also a favorite due to its noise capacity.

The power of the miner is set at a maximum of 860W and uses the Ethernet interface. The overall weight of the miner is 8.1 Kg and has a cooling fan of 12038. Temperature levels are set at 0 to 40 degrees centigrade. Humidity levels are set at 10 to 90 percent, which is fairly set for a rig that uses 750W.

The profitability of Innosilicon A10 Pro ETH(500Mh)

The income per day is also a must-look-into factor when buying this miner. Most miners will want to know the income per day and year.

The miner’s income is $15.15 per day and around $5,450 per year from community records and testing. Electricity cost per day is set at around -$2.10, and the yearly cost is around -$770. Daily profit after removing the cost is set at around $12.

The yearly profit after using this miner is around $4 600. And this is a completely affordable miner that comes with a promising profit ratio.

Warranty of Innosilicon A10 Pro ETH(500Mh)

For those that want to understand the warranty, the manufacturer has it all laid out. The warranty of the Innosilicon A10 Pro ETH will expire under the following conditions:
1)     If the user privately alters or demolishes the components.
2)     Any damage caused by lightning, poor quality power supply, and voltage surges.
3)     If the circuit board is damaged by water or is exposed to moisture.
4)     The circuit board is completely burned from the use of the miner
5)     Excessive overclocking due to using it in an overheating environment.

Power consumption of Innosilicon A10 Pro ETH(500Mh)

The power consumption of the miner is 750W. Here the device has low power consumption, and as such, the power needed to create this power consumption is low.

This is an added advantage to the miners because miners will not spend so much on the production cost. The power consumption is one of the lowest in the market and shows that it was produced to help the miners reduce the money spent purchasing electricity.